Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH
RM1880E _59 Vehicle Exterior _013254 EXTERIOR PANELS / TRIM _0068762 BACK DOOR OUTSIDE GARNISH A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).


PROCEDURE

Hide 1.INSTALL BACK DOOR OUTSIDE GARNISH

a.

Attach the 4 clips to install the back door outside garnish.


b.

Install the 3 nuts.


Hide 2.INSTALL BACK DOOR OUTSIDE HANDLE

Hide 3.INSTALL BACK DOOR TRIM BOARD ASSEMBLY