REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1.
REMOVE MANUAL TRANSMISSION ASSEMBLY |
 |
Remove the manual transmission (Click here).
| 2.
REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY |
 |
Remove the clutch release fork with the clutch release bearing from the transmission unit.
Remove the release fork support from the transmission unit.
- Remove the clip and clutch release bearing from the clutch release fork.
| 3.
REMOVE CLUTCH COVER ASSEMBLY |
 |
- Put matchmarks on the clutch cover and flywheel.
Text in Illustration
*a
|
Matchmark
|
Loosen each set bolt one turn at a time until spring tension is released.
Remove the 6 set bolts and pull off the clutch cover.
- NOTICE:
- Do not drop the clutch disc.
| 4.
REMOVE CLUTCH DISC ASSEMBLY |
 |
- NOTICE:
- Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.