2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

Disc cannot be Ejected

Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

INSPECTION PROCEDURE

HINT:
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


1. PRESS "EJECT" AND CHECK OPERATION
  1. Press the disc eject switch of the radio and display receiver assembly for 2 seconds or more and check that the disc is ejected.

    OK:
    Disc is ejected.



NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
OK


2. REPLACE DISC AND RECHECK
  1. Replace another and check if it can be ejected.

    OK:
    Disc is ejected.



NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
OK

END (DISC IS DEFECTIVE)


← Disc cannot be Inserted or is Ejected Right After Insertion (from Aug 2014)Disc cannot be Ejected (from Aug 2014) →