2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

CD/DVD Sound Skips

Circuit diagnosis · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

INSPECTION PROCEDURE

HINT:
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


1. CHECK DISC

  1. I100152
    Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc



NG
CHANGE DISC
OK


2. CHECK DISC

  1. I100151
    Check the disc.

    OK:
    The disc is clean.

    HINT:
    If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
CLEAN DISC
OK


3. CHECK OPERATION
  1. Check if the problem recurs using another disc.

    OK:
    The problem does not occur.



NG
Go to step 4
OK

END (DISC IS DEFECTIVE)

4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
  1. Check that the radio and display receiver assembly is properly installed (Click here).

    OK:
    Radio and display receiver assembly is properly installed.



NG
REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY (Click here)
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)


← CD/DVD Sound Skips (Aug 2013 – Jul 2014)Radio Broadcast cannot be Received or Poor Reception (Aug 2013 – Jul 2014) →