2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

CHECK FOR INTERMITTENT PROBLEMS

Troubleshooting · Vehicles built from Aug 2013

HINT:
Inspect the vehicle ECM using check mode. Intermittent problems are easier to detect with the intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.
  1. Clear the DTCs (Click here).
  2. Switch the ECM from normal mode to check mode using the intelligent tester (Click here).
  3. Perform a simulation test.
  4. Check and wiggle the harness(es), connector(s) and terminal(s).

← HOW TO PROCEED WITH TROUBLESHOOTING (from Aug 2013)BASIC INSPECTION (from Aug 2013) →