2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

Panel Switches do not Function

Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

INSPECTION PROCEDURE

HINT:
When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


1. CHECK PANEL SWITCH
  1. Check for foreign matter on the display.

    OK:
    The display is clean.



NG
REMOVE ANY FOREIGN MATTER FOUND
OK


2. CHECK PANEL SWITCH (OPERATION CHECK)

  1. E225786
    Enter the "Panel & Steering Switch Check Mode" screen. [Refer to Check Panel & Steering Switch in Operation Check (Click here)]

  1. Operate the abnormal switch and check if the switch status is correctly displayed.

    OK:
    The switch status is correctly displayed as operated.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)


← Display does not Dim when Light Control Switch is Turned ON (from Aug 2014)Panel Switches do not Function (from Aug 2014) →