Panel Switches do not Function
Circuit diagnosis · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
INSPECTION PROCEDURE
| 1. CHECK PANEL SWITCH |
 |
Check for foreign matter on the display.
- OK:
- The display is clean.
|
NG |
 |
|
| REMOVE ANY FOREIGN MATTER FOUND |
|
|
| OK |
|
 |
|
| 2. CHECK PANEL SWITCH (OPERATION CHECK) |
 |
- Enter the "Panel & Steering Switch Check Mode" screen. [Refer to Check Panel & Steering Switch in Operation Check (Click here)]
Operate the abnormal switch and check if the switch status is correctly displayed.
- OK:
- The switch status is correctly displayed as operated.
|
NG |
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
|