2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

Illumination for Panel Switch does not Come on with Tail Switch ON

Circuit diagnosis · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

INSPECTION PROCEDURE


1. CHECK VEHICLE SIGNAL (OPERATION CHECK)
E278187
  1. Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (Click here)]

  1. Check that the display for "TAIL" changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch
    Display
    Tail or head
    ON
    Off
    OFF

    HINT:
    This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.

  1. Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the light control switch operation.

    OK:
    Light Control Switch
    Display
    Tail or head
    DIM
    Off
    BRIGHT



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)


← Illumination for Panel Switch does not Come on with Tail Switch ON (Aug 2013 – Jul 2014)Display does not Dim when Light Control Switch is Turned ON (Aug 2013 – Jul 2014) →