Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014from Aug 2014
INSPECTION PROCEDURE
HINT:
When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1. CHECK VOICE GUIDANCE SETTING
Check that the voice guidance settings are not off.
OK:
Voice guidance settings are not off.
NG
CHANGE VOICE GUIDANCE SETTINGS TO ON
OK
2. CHECK AUDIO FUNCTION
Check that sound can be heard from a front speaker.
OK:
Sound can be heard.
NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)