INSTALLATION
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2) |
Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.
Install the oil control valve with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
- NOTICE:
- Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
- Be careful that the O-ring is not cracked when installing the oil control valve.
- Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
Connect the camshaft timing oil control valve connector.
| 2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2) |
Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.
Install the oil control valve with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
- NOTICE:
- Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
- Be careful that the O-ring is not cracked when installing the oil control valve.
- Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
Connect the oil control valve connector.
| 3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1) |
Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.
Install the oil control valve with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
- NOTICE:
- Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
- Be careful that the O-ring is not cracked when installing the oil control valve.
- Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
Connect the oil control valve connector.
| 4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1) |
Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.
Install the oil control valve with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
- NOTICE:
- Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
- Be careful that the O-ring is not cracked when installing the oil control valve.
- Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
Connect the oil control valve connector.
| 5. INSTALL NO. 1 AIR CLEANER HOSE |
Install the air cleaner hose with the 2 clamps.

- Torque:
- 5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
Text in Illustration *1
Paint mark
*a
Protrusion
*b
Groove
*c
Top
*d
RH
*e
Front
Install the bolt.
- Torque:
- 5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
Connect the vacuum hose and ventilation hose.
- HINT:
- The direction of the hose clamp is indicated in the illustration.
Attach the wire harness clamp.
| 6. INSTALL V-BANK COVER |
Attach the 2 V-bank cover hooks to the bracket. Then align the 2 V-bank cover grommets with the 2 pins and press down on the V-bank cover to attach the pins.

Text in Illustration *1
Pin
*2
Hook
