2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE INTAKE MANIFOLD
  1. Remove the intake manifold (Click here).


2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

A224780
  1. Disconnect the sensor connector.

  1. Using a 19 mm deep socket wrench, remove the sensor.

  1. Remove the gasket from the sensor.

← REMOVAL (Aug 2013 – Jul 2014)INSPECTION (from Aug 2013) →