2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

TERMINALS OF ECU

System information · Vehicles built from Aug 2013


CHECK CLEARANCE WARNING ECU
E149991E23
Text in Illustration  
*A
for 4 Sensor Type
*B
for 8 Sensor Type
  1. Measure the voltage and resistance and check for pulse signals according to the value(s) in the table below.

    for 4 Sensor Type 
    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    I1-7 (BOR) - I1-17 (E)
    P - W-B
    Power source for rear sensor circuit
    Engine switch off
    Below 1.5 V
    Engine switch on (IG), TOYOTA parking assist-sensor system on
    7.2 to 8.8 V
    I1-10 (BBZ) - I1-17 (E)
    GR - W-B
    Clearance warning buzzer signal
    Engine switch off
    Below 1.5 V
    Engine switch on (IG), TOYOTA parking assist-sensor system on
    11 to 14 V
    I1-11 (EF) - I1-17 (E)
    LG - W-B
    Ground for clearance warning buzzer
    When sonar detects obstacle (Buzzer sounds)
    Pulse generation
    (See waveform 1)
    I1-12 (CSSW) - I1-17 (E)
    V - W-B
    Clearance sonar main switch signal
    Engine switch on (IG), clearance sonar main switch on
    11 to 14 V
    Engine switch on (IG), clearance sonar main switch off
    Below 1 V
    I1-15 (IG) - I1-17 (E)
    L - W-B
    IG power source signal
    Engine switch off
    Below 1.5 V
    Engine switch on (IG)
    11 to 14 V
    I1-17 (E) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    I1-18 (E2) - I1-17 (E)
    R - W-B
    Ground for rear sensors
    Always
    Below 1 Ω
    I1-24 (SOR) - I1-17 (E)
    W - W-B
    Rear sensor communication signal
    Engine switch on (IG), TOYOTA parking assist-sensor system on, shift lever in R
    Pulse generation
    (See waveform 2)
    for 8 Sensor Type 
    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    G154-7 (BOR) - G154-17 (E)
    P - W-B
    Power source for rear sensor circuit
    Engine switch off
    Below 1.5 V
    Engine switch on (IG), TOYOTA parking assist-sensor system on
    7.2 to 8.8 V
    G154-9 (SOF) - G154-17 (E)
    R - W-B
    Front sensor communication signal
    Engine switch on (IG), TOYOTA parking assist-sensor system on, shift lever in R
    Pulse generation
    (See waveform 2)
    G154-10 (BBZ) - G154-17 (E)
    GR - W-B
    Clearance warning buzzer signal
    Engine switch off
    Below 1.5 V
    Engine switch on (IG), TOYOTA parking assist-sensor system on
    11 to 14 V
    G154-11 (EF) - G154-17 (E)
    LG - W-B
    Ground for clearance warning buzzer
    When sonar detects obstacle (Buzzer sounds)
    Pulse generation
    (See waveform 1)
    G154-12 (CSSW) - G154-17 (E)
    V - W-B
    Clearance sonar main switch signal
    Engine switch on (IG), clearance sonar main switch on
    11 to 14 V
    Engine switch on (IG), clearance sonar main switch off
    Below 1 V
    G154-15 (IG) - G154-17 (E)
    L - W-B
    IG power source signal
    Engine switch off
    Below 1.5 V
    Engine switch on (IG)
    11 to 14 V
    G154-17 (E) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    G154-18 (E2) - G154-17 (E)
    R - W-B
    Ground for rear sensors
    Always
    Below 1 Ω
    G154-19 (E1) - G154-17 (E)
    G - W-B
    Ground for front sensors
    Always
    Below 1 Ω
    G154-21 (BOF) - G154-17 (E)
    V - W-B
    Power source for front sensor circuit
    Engine switch off
    Below 1.5 V
    Engine switch on (IG), TOYOTA parking assist-sensor system on
    7.2 to 8.8 V
    G154-24 (SOR) - G154-17 (E)
    W - W-B
    Rear sensor communication signal
    Engine switch on (IG), TOYOTA parking assist-sensor system on, shift lever in R
    Pulse generation
    (See waveform 2)

  2. E168464E01
    Using an oscilloscope, check waveform 1.
    Measurement Condition 
    Item
    Content
    Terminal No. (Symbol)
    1. I1-11 (EF) - I1-17 (E)*1
    2. G154-11 (EF) - G154-17 (E)*2
    Tool Setting
    2 V/DIV., 500 μsec./DIV.
    Condition
    When sonar detects obstacle (Buzzer sounds)
    1. *1: for 4 Sensor Type
    2. *2: for 8 Sensor Type

  3. E168463E01
    Using an oscilloscope, check waveform 2.
    Measurement Condition 
    Item
    Content
    Terminal No. (Symbol)
    1. CH1: G154-9 (SOF) - G154-17 (E)
    2. CH2: I1-24 (SOR) - I1-17 (E)*1
    3. CH2: G154-24 (SOR) - G154-17 (E)*2
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine switch on (IG), TOYOTA parking assist-sensor system on, shift lever in R
    1. *1: for 4 Sensor Type
    2. *2: for 8 Sensor Type


CHECK DRIVING SUPPORT SWITCH CONTROL ECU (for 8 Sensor Type)

  1. for Automatic Transmission:
    C288327E05

    1. Measure the voltage according to the value(s) in the table below.

      Terminal No. (Symbol)
      Wiring Color
      Terminal Description
      Condition
      Specified Condition
      G163-5 (SWI1) - G163-14 (SWI2)
      SB - P
      Steering pad switch assembly input signal (Menu, ENTER, Up, or Down switch)
      Engine switch on (IG), Menu switch pressed
      0 V
      Engine switch on (IG), ENTER switch pressed
      0.9 V
      Engine switch on (IG), Up switch pressed
      3.4 V
      Engine switch on (IG), Down switch pressed
      2.0 V
      Engine switch on (IG), Menu, ENTER, Up, or Down switch not pressed
      4.9 V
      G163-14 (SWI2) - Body ground
      P - Body ground
      Steering pad switch assembly input signal (Menu, ENTER, Up, or Down switch)
      Always
      Below 1 V
      G162-9 (SWO1) - Body ground
      V - Body ground
      Steering pad switch assembly output signal (Menu, ENTER, Up, or Down switch)
      Engine switch on (IG), Menu, ENTER, Up, or Down switch pressed to turn TOYOTA parking assist-sensor system on
      11 to 14 V
      Engine switch on (IG), Menu, ENTER, Up, or Down switch not pressed
      Below 1 V

  2. for Manual Transmission:
    E194339E08

    1. Measure the voltage according to the value(s) in the table below.

      Terminal No. (Symbol)
      Wiring Color
      Terminal Description
      Condition
      Specified Condition
      G76-3 (SWI1) - G76-4 (SWI2)
      SB - P
      Steering pad switch assembly input signal (Menu, ENTER, Up, or Down switch)
      Engine switch on (IG), Menu switch pressed
      0 V
      Engine switch on (IG), ENTER switch pressed
      0.9 V
      Engine switch on (IG), Up switch pressed
      3.4 V
      Engine switch on (IG), Down switch pressed
      2.0 V
      Engine switch on (IG), Menu, ENTER, Up, or Down switch not pressed
      4.9 V
      G76-4 (SWI2) - Body ground
      P - Body ground
      Steering pad switch assembly input signal (Menu, ENTER, Up, or Down switch)
      Always
      Below 1 V
      G76-12 (SWO1) - Body ground
      V - Body ground
      Steering pad switch assembly output signal (Menu, ENTER, Up, or Down switch)
      Engine switch on (IG), Menu, ENTER, Up, or Down switch pressed to turn TOYOTA parking assist-sensor system on
      11 to 14 V
      Engine switch on (IG), Menu, ENTER, Up, or Down switch not pressed
      Below 1 V

← PROBLEM SYMPTOMS TABLE (from Aug 2014)DTC CHECK / CLEAR (from Aug 2013) →