2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE INTAKE AIR SURGE TANK
  1. Remove the intake air surge tank (Click here).


2. REMOVE REAR CYLINDER HEAD COVER

  1. A224695
    Remove the 3 bolts and cover.


3. DISCONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY

  1. A223035
    Disconnect the No. 1 fuel pipe sub-assembly (Click here).


4. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY

  1. A223036
    Disconnect the No. 2 fuel pipe sub-assembly (Click here).


5. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY

  1. A223037
    Disconnect the 6 fuel injector connectors.

  1. Remove the 4 bolts and fuel delivery pipe together with the 6 fuel injectors.

    NOTICE:
    Be careful not to drop the injectors when removing the fuel delivery pipe.


6. REMOVE FUEL INJECTOR ASSEMBLY

  1. A223038E01
    Remove the 6 fuel injectors from the fuel delivery pipe.
    Text in Illustration 
    *1
    Fuel Delivery Pipe
    *2
    Fuel Injector

  1. Remove the O-ring and injector vibration insulator from each fuel injector.

← REMOVAL (Aug 2013 – Jul 2014)INSPECTION (Aug 2013 – Jul 2014) →