2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

  1. B081499E08
    Check the ELR.

    1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is more than 45°, check that the belt locks.
      If the operation is not as specified, replace the rear No. 1 seat outer belt assembly.

      Text in Illustration 
      *a
      Unlock
      *b
      Lock
      *c
      45°

  1. Check the fastening function of the child restraint system.

    NOTICE:
    The check should be performed with the outer belt installed.


    1. When the belt is pulled out fully, check that the belt automatically starts to retract.

    2. After the belt is fully retracted, check that the belt can be pulled out and retracted again.
      If the operation is not as specified, replace the rear No. 1 seat outer belt assembly.

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →