2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT THERMOSTAT

G039456E01

HINT:
The valve opening temperature is inscribed on the thermostat.

  1. P011706E02
    Immerse the thermostat in water, and then gradually heat the water.

  1. Check the valve opening temperature of the thermostat.

    Standard valve opening temperature:
    80 to 84°C (176 to 183°F)

    If the valve opening temperature is not as specified, replace the thermostat.

  1. G039457E02
    Check the valve lift.

    Standard valve lift:
    8.5 mm (0.335 in.) or more at 95°C (203°F)

    Text in Illustration 
    *a
    Valve Lift
    If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is at low temperatures (below 77°C (171°F)).
    If not fully closed, replace the thermostat.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →