2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

INSTALLATION

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY
  1. Connect the connector.

  1. Install the front No. 4 speaker assembly with the 2 screws.

    NOTICE:
    1. Do not touch the cone of the speaker.
    2. When installing the speaker to the instrument panel, be careful that the wires do not get caught between parts.


2. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL
  1. Attach the 8 clips and 2 guides to install the upper instrument cluster finish panel.


3. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)
(Click here)

4. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
  1. Connect the connector.

  1. Install the front No. 2 speaker assembly with the 2 screws.

    NOTICE:
    1. Do not touch the cone of the speaker.
    2. When installing the speaker to the instrument panel, be careful that the wires do not get caught between parts.


5. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
  1. Attach the 2 clips, claw and 2 guides to install the No. 1 instrument panel speaker panel.


6. INSTALL FRONT PILLAR GARNISH LH
  1. Attach the 3 guides to install the front pillar garnish.


7. INSTALL NO. 1 ASSIST GRIP

HINT:
Use the same procedure for the other No. 1 assist grip.

  1. Attach the 2 claws to install the No. 1 assist grip.

  1. Install the 2 bolts.


8. INSTALL FRONT NO. 1 ASSIST GRIP PLUG LH

HINT:
Use the same procedure for the other front No. 1 assist grip plug.

  1. Attach the 2 claws to install the front No. 1 assist grip plug.


9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Aug 2013 – Jul 2014)COMPONENTS (from Aug 2013) →