2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

CHECK FOR INTERMITTENT PROBLEMS

Troubleshooting · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
Intelligent tester only:
Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with an intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default). Normal mode uses 2 trip detection logic.

  1. Clear the DTC(s) (Click here).
  2. Switch the ECM from normal mode to check mode using the intelligent tester (Click here).
  3. Perform a simulation test (Click here).
  4. Check and wiggle the harness(es), connector(s) and terminal(s) (Click here).
← CHECK FOR INTERMITTENT PROBLEMS (Aug 2013 – Jul 2014)BASIC INSPECTION (from Aug 2013) →