2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

TERMINALS OF ECU

System information · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
B235899E06
Text in Illustration 
*A
for LHD
*B
for RHD
  1. Remove the main body ECU (Click here).

  2. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    A-30 (BECU) - Body ground
    -
    Auxiliary battery power supply
    Always
    11 to 14 V
    A-31 (ALTB) - Body ground
    -
    Auxiliary battery power supply
    Always
    11 to 14 V
    A-32 (IG) - Body ground
    -
    Ignition switch power supply
    Ignition switch ON
    11 to 14 V
    A-32 (IG) - Body ground
    -
    Ignition switch power supply
    Ignition switch off
    Below 1 V
    A-29 (ACC) - Body ground
    -
    ACC power supply
    Ignition switch ACC
    11 to 14 V
    A-29 (ACC) - Body ground
    -
    ACC power supply
    Ignition switch off
    Below 1 V
    A-11 (GND1) - Body ground
    -
    Ground
    Always
    Below 1 Ω
    G63-3 (GND2) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    If the result is not as specified, there may be a malfunction in the wire harness.

  3. Install the main body ECU (Click here).

  4. Measure the voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    2I-27 (FLCY) - Body ground*1
    R - Body ground
    Front door LH courtesy switch input
    Front door LH open
    Below 1 V
    2I-27 (FLCY) - Body ground*1
    R - Body ground
    Front door LH courtesy switch input
    Front door LH closed
    11 to 14 V
    2D-31 (FLCY) - Body ground*2
    R - Body ground
    Front door LH courtesy switch input
    Front door LH open
    Below 1 V
    2D-31 (FLCY) - Body ground*2
    R - Body ground
    Front door LH courtesy switch input
    Front door LH closed
    11 to 14 V
    2D-15 (FRCY) - Body ground*1
    B - Body ground
    Front door RH courtesy switch input
    Front door RH open
    Below 1 V
    2D-15 (FRCY) - Body ground*1
    B - Body ground
    Front door RH courtesy switch input
    Front door RH closed
    11 to 14 V
    2H-26 (FRCY) - Body ground*2
    B - Body ground
    Front door RH courtesy switch input
    Front door RH open
    Below 1 V
    2H-26 (FRCY) - Body ground*2
    B - Body ground
    Front door RH courtesy switch input
    Front door RH closed
    11 to 14 V
    G65-3 (LCTY) - Body ground*3
    V - Body ground
    Rear door LH courtesy light switch input
    Rear door LH open
    Below 1 V
    G65-3 (LCTY) - Body ground*3
    V - Body ground
    Rear door LH courtesy light switch input
    Rear door LH closed
    11 to 14 V
    G64-6 (RCTY) - Body ground*3
    R - Body ground
    Rear door RH courtesy light switch input
    Rear door RH open
    Below 1 V
    G64-6 (RCTY) - Body ground*3
    R - Body ground
    Rear door RH courtesy light switch input
    Rear door RH closed
    11 to 14 V
    G64-19 (BCTY) - Body ground
    G - Body ground
    Back door courtesy light switch input
    Back door open
    Below 1 V
    G64-19 (BCTY) - Body ground
    G - Body ground
    Back door courtesy light switch input
    Ignition switch off, all doors closed and back door closed
    Pulse generation (see waveform 1 or 2)
    G64-1 (GCTY) - Body ground*4
    V - Body ground
    Glass hatch courtesy switch input
    Glass hatch open
    Below 1 V
    G64-1 (GCTY) - Body ground*4
    V - Body ground
    Glass hatch courtesy switch input
    Ignition switch off, all doors closed and glass hatch closed
    Pulse generation (see waveform 3 or 4)
    G64-11 (L2) - Body ground
    GR - Body ground
    Driver side door key-linked lock input
    Driver side door key cylinder lock position
    Below 1 V
    G64-11 (L2) - Body ground
    GR - Body ground
    Driver side door key-linked lock input
    Ignition switch off, all doors closed and driver side door key cylinder neutral position
    Pulse generation (see waveform 5 or 6)
    G64-24 (UL3) - Body ground
    LG - Body ground
    Driver side door key-linked unlock input
    Driver side door key cylinder unlock position
    Below 1 V
    G64-24 (UL3) - Body ground
    LG - Body ground
    Driver side door key-linked unlock input
    Ignition switch off, all doors closed and driver side door key cylinder neutral position
    Pulse generation (see waveform 7 or 8)
    G64-7 (LSFL) - Body ground
    G - Body ground
    Front door LH lock position switch input
    Front door LH unlocked
    Below 1 V
    G64-7 (LSFL) - Body ground
    G - Body ground
    Front door LH lock position switch input
    Ignition switch off, all doors closed and front door LH locked
    Pulse generation (see waveform 9 or 10)
    G64-18 (LSFR) - Body ground
    G - Body ground
    Front door RH lock position switch input
    Front door RH unlocked
    Below 1 V
    G64-18 (LSFR) - Body ground
    G - Body ground
    Front door RH lock position switch input
    Ignition switch off, all doors closed and front door RH locked
    Pulse generation (see waveform 11 or 12)
    2I-25 (LSWL) - Body ground*1, *4
    B - Body ground
    Rear door LH lock position switch input
    Rear door LH unlocked
    Below 1 V
    2I-25 (LSWL) - Body ground*1, *4
    B - Body ground
    Rear door LH lock position switch input
    Ignition switch off, all doors closed and rear door LH locked
    Pulse generation (see waveform 13 or 14)
    2D-16 (LSWL) - Body ground*2, *4
    B - Body ground
    Rear door LH lock position switch input
    Rear door LH unlocked
    Below 1 V
    2D-16 (LSWL) - Body ground*2, *4
    B - Body ground
    Rear door LH lock position switch input
    Ignition switch off, all doors closed and rear door LH locked
    Pulse generation (see waveform 15 or 16)
    G63-2 (LSWR) - Body ground*4
    V - Body ground
    Rear door RH lock position switch input
    Rear door RH unlocked
    Below 1 V
    G63-2 (LSWR) - Body ground*4
    V - Body ground
    Rear door RH lock position switch input
    Ignition switch off, all doors closed and rear door RH locked
    Pulse generation (see waveform 17 or 18)
    G65-13 (LSWB) - Body ground
    SB - Body ground
    Back door lock position switch input
    Back door lock unlocked
    Below 1 V
    G65-13 (LSWB) - Body ground
    SB - Body ground
    Back door lock position switch input
    Ignition switch off, all doors closed and back door locked
    Pulse generation (see waveform 19 or 20)
    2D-34 (IND) - Body ground
    G - Body ground
    Security indicator light signal
    Security indicator light illuminates (illuminates only for 30 (+/-5) seconds in alarm sounding state (blinks when system in armed state))
    3 to 6 V
    G63-18 (SSCL) - Body ground*5
    G - Body ground
    Theft warning siren (self power siren) signal
    Theft warning siren (self power siren) sounding (theft warning system in alarm sounding state)
    Pulse generation
    G63-18 (SSCL) - Body ground*5
    G - Body ground
    Theft warning siren (self power siren) signal
    Theft warning siren (self power siren) not sounding (theft warning system in armed state)
    Pulse generation
    G63-12 (ISIF) - Body ground*6
    R - Body ground
    Intrusion sensor signal input
    No moving object detected
    6.5 to 14 V
    G63-12 (ISIF) - Body ground*6
    R - Body ground
    Intrusion sensor signal input
    Moving object detected during arming preparation state or armed state
    Pulse generation (see waveform 21)
    G63-6 (GCS) - Body ground*10
    V - Body ground
    Tilt sensor signal input
    Vehicle tilt not detected
    6.5 to 14 V
    G63-6 (GCS) - Body ground*10
    V - Body ground
    Tilt sensor signal input
    Vehicle tilt detected during arming preparation state or armed state
    Pulse generation (see waveform 22)
    G64-23 (SSW1) - Body ground*6
    L - Body ground
    Intrusion sensor OFF switch signal
    Intrusion sensor OFF switch on
    Below 1.5 V
    G64-23 (SSW1) - Body ground*6
    L - Body ground
    Intrusion sensor OFF switch signal
    Ignition switch off, all doors closed and intrusion sensor OFF switch off
    Pulse generation (see waveform 23 or 24)
    2I-35 (GPBS) - Body ground*1, *3, *8
    R - Body ground
    Glass breakage sensor signal
    Glass breakage sensor normal
    Below 2 V
    2D-30 (GPBS) - Body ground*2, *3, *8
    R - Body ground
    Glass breakage sensor signal
    Glass breakage sensor normal
    Below 2 V
    2D-30 (GPBS) - Body ground*1, *7, *8
    B - Body ground
    Glass breakage sensor signal
    Glass breakage sensor normal
    Below 2 V
    2H-35 (GPBS) - Body ground*2, *7, *8
    B - Body ground
    Glass breakage sensor signal
    Glass breakage sensor normal
    Below 2 V
    2F-23 (HCTY) - Body ground
    B - Body ground
    Security courtesy switch
    Engine hood open
    Below 1 V
    2F-23 (HCTY) - Body ground
    B - Body ground
    Security courtesy switch
    Ignition switch off, all doors closed and engine hood closed
    Pulse generation (see waveform 25 or 26)
    2F-29 (HORN) - Body ground
    G - Body ground
    Vehicle horn signal
    Vehicle horn sounding (theft warning system in alarm sounding state)
    Pulse generation
    2F-29 (HORN) - Body ground
    G - Body ground
    Vehicle horn signal
    Vehicle horn not sounding (theft warning system in armed state)
    11 to 14 V
    2F-25 (SH) - Body ground*9
    GR - Body ground
    Security horn signal
    Security horn sounding (theft warning system in alarm sounding state)
    Pulse generation
    2F-25 (SH) - Body ground*9
    GR - Body ground
    Security horn signal
    Security horn not sounding (theft warning system in armed state)
    11 to 14 V
    1. *1: for LHD
    2. *2: for RHD
    3. *3: for 5 Door
    4. *4: w/ Glass Hatch Opener System
    5. *5: w/ Security Siren
    6. *6: w/ Intrusion Sensor
    7. *7: for 3 Door
    8. *8: w/ Glass Breakage Sensor
    9. *9: w/ Security Horn
    10. *10: w/ Tilt Sensor
    If the result is not as specified, the main body ECU or driver side junction block assembly may have a malfunction.

  5. B199631E01
    Using an oscilloscope, check waveform 1.
    Waveform 1 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-19 (BCTY) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and back door closed

  6. B199632E01
    Using an oscilloscope, check waveform 2.
    Waveform 2 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-19 (BCTY) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and back door closed

  7. B199631E01
    Using an oscilloscope, check waveform 3.
    Waveform 3 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-1 (GCTY) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and glass hatch closed

  8. B199632E01
    Using an oscilloscope, check waveform 4.
    Waveform 4 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-1 (GCTY) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and glass hatch closed

  9. B201885E01
    Using an oscilloscope, check waveform 5.
    Waveform 5 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-11 (L2) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door key cylinder neutral position

  10. B201886E01
    Using an oscilloscope, check waveform 6.
    Waveform 6 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-11 (L2) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door key cylinder neutral position

  11. B199631E01
    Using an oscilloscope, check waveform 7.
    Waveform 7 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-24 (UL3) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and driver side door key cylinder neutral position

  12. B199632E01
    Using an oscilloscope, check waveform 8.
    Waveform 8 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-24 (UL3) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and driver side door key cylinder neutral position

  13. B199631E01
    Using an oscilloscope, check waveform 9.
    Waveform 9 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-7 (LSFL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door LH locked

  14. B199632E01
    Using an oscilloscope, check waveform 10.
    Waveform 10 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-7 (LSFL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door LH locked

  15. B199631E01
    Using an oscilloscope, check waveform 11.
    Waveform 11 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-18 (LSFR) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door RH locked

  16. B199632E01
    Using an oscilloscope, check waveform 12.
    Waveform 12 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-18 (LSFR) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and front door RH locked

  17. B199631E01
    Using an oscilloscope, check waveform 13.
    Waveform 13 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    2I-25 (LSWL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door LH locked

  18. B199632E01
    Using an oscilloscope, check waveform 14.
    Waveform 14 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    2I-25 (LSWL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door LH locked

  19. B199631E01
    Using an oscilloscope, check waveform 15.
    Waveform 15 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    2D-16 (LSWL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door LH locked

  20. B199632E01
    Using an oscilloscope, check waveform 16.
    Waveform 16 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    2D-16 (LSWL) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door LH locked

  21. B201885E01
    Using an oscilloscope, check waveform 17.
    Waveform 17 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G63-2 (LSWR) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door RH locked

  22. B201886E01
    Using an oscilloscope, check waveform 18.
    Waveform 18 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G63-2 (LSWR) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and rear door RH locked

  23. B199631E01
    Using an oscilloscope, check waveform 19.
    Waveform 19 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G65-13 (LSWB) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and back door locked

  24. B199632E01
    Using an oscilloscope, check waveform 20.
    Waveform 20 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G65-13 (LSWB) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and back door locked

  25. B178246E01
    Using an oscilloscope, check waveform 21.
    Waveform 21 (Reference) 
    Item
    Content
    Terminal No. (Symbol)
    G63-12 (ISIF) - Body ground
    Tool Setting
    2 V/DIV., 500 ms/DIV.
    Condition
    Moving object detected during arming preparation state or armed state

  26. B178246E01
    Using an oscilloscope, check waveform 22.
    Waveform 22 (Reference) 
    Item
    Content
    Terminal No. (Symbol)
    G63-6 (GCS) - Body ground
    Tool Setting
    2 V/DIV., 500 ms/DIV.
    Condition
    Vehicle tilt detected during arming preparation state or armed state

  27. B199631E01
    Using an oscilloscope, check waveform 23.
    Waveform 23 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-23 (SSW1) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and intrusion sensor OFF switch off

  28. B199632E01
    Using an oscilloscope, check waveform 24.
    Waveform 24 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    G64-23 (SSW1) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and intrusion sensor OFF switch off

  29. B199631E01
    Using an oscilloscope, check waveform 25.
    Waveform 25 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    2F-23 (HCTY) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and engine hood closed

  30. B199632E01
    Using an oscilloscope, check waveform 26.
    Waveform 26 (Reference)  
    Item
    Content
    Terminal No. (Symbol)
    2F-23 (HCTY) - Body ground
    Tool Setting
    5 V/DIV., 20 ms/DIV.
    Condition
    Ignition switch off, all doors closed and engine hood closed

← PROBLEM SYMPTOMS TABLE (from Aug 2014)TERMINALS OF ECU (from Aug 2014) →