2013-2015 Land Cruiser Prado · Service Manual Steering

REMOVAL

Removal / installation · Vehicles built from Aug 2013

NOTICE:
  1. When using a vise, do not overtighten it.
  2. When installing the parts indicated by arrows, coat them with power steering fluid (Click here).


1. REMOVE VANE PUMP V BELT

  1. A121092E02
    Loosen the bolt and nut and remove the V belt.


2. DISCONNECT OIL RESERVOIR TO NO. 1 PUMP HOSE

  1. C216487
    Slide the clip and disconnect the oil hose.


3. DISCONNECT PRESSURE FEED TUBE ASSEMBLY

  1. C216488
    Remove the union bolt and gasket and disconnect the pressure feed tube.


4. REMOVE FAN SHROUD
  1. Remove the fan shroud (Click here).


5. REMOVE VANE PUMP PULLEY

  1. C216489E01
    Using SST, remove the nut and vane pump pulley.
    SST
    09960-10010   (09962-01000, 09963-01000)
    Text in Illustration 
    *a
    Turn
    *b
    Hold


6. REMOVE VANE PUMP ASSEMBLY

  1. C123346
    Remove the 2 bolts, nut and vane pump.

← ON-VEHICLE INSPECTION (from Aug 2013)DISASSEMBLY (from Aug 2013) →