DISPOSAL
Removal / installation · Vehicles built from Aug 2013
| 1. DISPOSE OF REAR SEAT STAY SUB-ASSEMBLY |
Hold the seat stay in a vise so that it is horizontal with the piston-rod pulled out.
Wear safety glasses. Gradually cut at a point between A and B shown in the illustration using a metal saw to release the gas.

- Standard:
Item
Specified Condition
A - B
80 mm (3.15 in.)
- NOTICE:
- Although the gas inside the seat stay is colorless, odorless and harmless, there is a possibility that metal debris could scatter. Therefore, cover the part with a piece of cloth or other material.
