2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL REAR NO. 1 SEAT ASSEMBLY LH
  1. Place the seat in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Temporarily install the seat with the 3 bolts and nut.

  1. B240280E01
    Tighten the bolts and nut in the order indicated in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }


2. INSTALL REAR NO. 3 SEAT CUSHION HINGE COVER
  1. Attach the claw to install the cover.


3. INSTALL REAR NO. 4 SEAT CUSHION HINGE COVER
  1. Attach the claw to install the cover.


4. INSTALL REAR NO. 1 SEAT CUSHION HINGE COVER
  1. Return the seat to the upright position.

  1. B240274
    Attach the 2 guides and 6 claws to install the cover.


5. INSTALL REAR NO. 2 SEAT CUSHION HINGE COVER

  1. B240272
    Attach the 2 guides and 6 claws to install the cover.


6. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
  1. Install the headrest.


7. INSTALL REAR SEAT HEADREST ASSEMBLY
  1. Install the headrest.

← REASSEMBLY (from Aug 2013)DISPOSAL (from Aug 2013) →