2013-2015 Land Cruiser Prado · Service Manual Steering

Tilt and Telescopic Manual Switch Circuit

Circuit diagnosis · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The signals generated by operating the tilt and telescopic switch are sent to the multiplex tilt and telescopic ECU through the serial line.

INSPECTION PROCEDURE


1. READ VALUE USING INTELLIGENT TESTER (TILT UP/DOWN SWITCH, TELESCO SHORT/LONG SWITCH)
  1. Use the Data List to check if the tilt and telescopic switch is functioning properly.

    Tilt & Telescopic 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    Tilt Up Switch
    Input state of tilt up by manual switch/ON or OFF
    ON: Tilt up activated by manual switch
    OFF: Tilt up not activated by manual switch
    -
    Tilt Down Switch
    Input state of tilt down by manual switch/ON or OFF
    ON: Tilt down activated by manual switch
    OFF: Tilt down not activated by manual switch
    -
    Telesco Short Switch
    Input state of telescopic short by manual switch/ON or OFF
    ON: Telescopic short activated by manual switch
    OFF: Telescopic short not activated by manual switch
    -
    Telesco Long Switch
    Input state of telescopic long by manual switch/ON or OFF
    ON: Telescopic long activated by manual switch
    OFF: Telescopic long not activated by manual switch
    -

OK:
"ON" is displayed on the intelligent tester screen for each switch that is turned on.
"OFF" is displayed on the intelligent tester screen for each switch that is turned off.



NG
REPLACE TILT AND TELESCOPIC SWITCH (Click here)
OK

REPLACE MULTIPLEX TILT AND TELESCOPIC ECU (Click here)


← Tilt and Telescopic Manual Switch Circuit (Aug 2013 – Jul 2014)IG Power Source Circuit (Aug 2013 – Jul 2014) →