REMOVAL
Removal / installation · Vehicles built from Aug 2013
- CAUTION:
- Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (Click here).
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE NO. 1 INSTRUMENT LOWER PANEL AIRBAG ASSEMBLY |
| 2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU |
Detach the wire harness clamp.
Disconnect the 2 connectors.

Remove the bolt and ECU.
