2013-2015 Land Cruiser Prado · Service Manual Steering

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Aug 2013


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Tilt & Telescopic / DTC.

  5. Read the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Tilt & Telescopic / DTC.

  5. Clear the DTCs.

← TERMINALS OF ECU (from Aug 2013)FREEZE FRAME DATA (from Aug 2013) →