2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Aug 2013


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Trouble Codes.

  5. Check the details of the DTC(s)


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Trouble Codes.

  5. Clear the DTCs.

← TERMINALS OF ECU (from Aug 2014)FAIL-SAFE CHART (from Aug 2013) →