INSTALLATION
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY |
Install a new gasket and the differential carrier assembly with the 10 nuts and 10 washers.
- Torque:
- 52 N*m{ 530 kgf*cm , 38 ft.*lbf }
| 2. INSTALL REAR AXLE SHAFT LH |
Install the rear axle shaft LH (Click here).
| 3. INSTALL REAR AXLE SHAFT RH |
- HINT:
- Use the same procedure described for the LH side.
| 4. INSTALL PROPELLER SHAFT ASSEMBLY |
Install the propeller shaft assembly (Click here).
