2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE INTAKE MANIFOLD
  1. Remove the intake manifold (Click here).


2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
  1. Disconnect the engine coolant temperature sensor connector.

  1. A102134
    Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor and gasket.

← REMOVAL (Aug 2013 – Jul 2014)INSPECTION (from Aug 2013) →