INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT ENGINE COOLANT TEMPERATURE SENSOR |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 (E2) - 2 (THW)
20°C (68°F)
2.32 to 2.59 kΩ
80°C (176°F)
0.310 to 0.326 kΩ


Text in Illustration *1
Resistance
*2
Temperature
*3
Acceptable
-
-
- NOTICE:
- If checking the engine coolant temperature sensor in water, be careful not to allow water to contact the terminals. After checking, clean off any water on the engine coolant temperature sensor.
