2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

TERMINALS OF ECU

System information · Vehicles built from Aug 2013


AIR CONDITIONING AMPLIFIER

  1. Measure the voltage and resistance according to the value(s) in the table below.
    C215955E07

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    G24-6 (SG-5) - Body ground
    R - Body ground
    Ground
    Always
    Below 1 Ω
    G24-8 (S5-2) - Body ground
    L - Body ground
    Power supply
    Ignition switch ON
    4.5 to 5.5 V
    G24-9 (ROUT) - Body ground
    LG - Body ground
    Climate control blower control signal
    Ignition switch ON, refreshing seat switch on (blower position)
    Pulse generation (See waveform 1)
    G24-10 (LOUT) - Body ground
    V - Body ground
    Climate control blower control signal
    Ignition switch ON, refreshing seat switch on (blower position)
    Pulse generation (See waveform 1)
    G24-15 (SW5) - Body ground
    W - Body ground
    Output climate control signal (front passenger side)
    Ignition switch ON, refreshing seat switch blower side volume 3
    Pulse generation (See waveform 2)
    G24-16 (SW4) - Body ground
    GR - Body ground
    Output climate control signal (driver side)
    Ignition switch ON, refreshing seat switch blower side volume 3
    Pulse generation (See waveform 2)
    G25-31 (S5-4) - Body ground
    V - Body ground
    Power supply
    Ignition switch ON
    4.5 to 5.5 V
    G25-35 (SG-4) - Body ground
    G - Body ground
    Ground
    Always
    Below 1 Ω

    1. B295627E01
      Using an oscilloscope, check waveform 1.
      Measurement Condition 
      Item
      Content
      Terminal No. (Symbol)
      G24-9 (ROUT) - Body ground
      G24-10 (LOUT) - Body ground
      Tool Setting
      2 V/DIV., 500 μsec/DIV.
      Condition
      Ignition switch ON, refreshing seat switch on (blower position)

    2. B188622E01
      Using an oscilloscope, check waveform 2.
      Measurement Condition 
      Item
      Content
      Terminal No. (Symbol)
      G24-15 (SW5) - Body ground
      G24-16 (SW4) - Body ground
      Tool Setting
      2 V/DIV., 500 μsec/DIV.
      Condition
      Ignition switch ON, refreshing seat switch blower side volume 3


AIR CONDITIONING CONTROL ASSEMBLY (Click here)
← PROBLEM SYMPTOMS TABLE (from Aug 2014)COMPONENTS (Aug 2013 – Jul 2014) →