2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL FRONT CRANKSHAFT OIL SEAL

  1. A056913E02
    Apply MP grease to the lip of a new oil seal.

  1. Using SST and a hammer, tap in the oil seal to a depth of 0.5 mm (0.0197 in.) from the oil pump case edge.

    SST
    09214-60010  


2. INSTALL CRANKSHAFT TIMING PULLEY

  1. A056897E04
    Align the key groove of the timing pulley with the pulley set key.

  1. Using SST and a hammer, tap in the timing pulley with the flange side facing inward.

    SST
    09223-46011  
    Text in Illustration 
    *a
    Inside


3. INSTALL TIMING BELT
  1. Install the timing belt (Click here).

← REMOVAL (from Aug 2013)COMPONENTS (from Aug 2013) →