2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE TIMING BELT
  1. Remove the timing belt (Click here).


2. REMOVE CRANKSHAFT TIMING PULLEY

  1. A056898E02
    Using a screwdriver, remove the crankshaft timing pulley.
    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05010, 09953-05020, 09954-05010)

    HINT:
    If the timing pulley cannot be removed by using a screwdriver, remove it with SST.


3. REMOVE FRONT CRANKSHAFT OIL SEAL

  1. A056914E03
    Using a knife, cut off the lip of the oil seal.
    Text in Illustration 
    *a
    Cut Position

  1. Using a screwdriver, pry out the oil seal.

    NOTICE:
    Do not damage the crankshaft.

    NOTICE:
    Tape the screwdriver before use.

← COMPONENTS (from Aug 2013)INSTALLATION (from Aug 2013) →