2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

DISASSEMBLY

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE INTAKE VALVE

  1. A101369E01
    Using SST and wooden blocks, compress the compression spring and remove the valve retainer locks.
    SST
    09202-70020   (09202-00010)

  1. Remove the retainer, compression spring and valve.

    HINT:
    Arrange the removed parts in the correct order.


2. REMOVE EXHAUST VALVE

  1. A101370E01
    Using SST and wooden blocks, compress the compression spring and remove the valve retainer locks.
    SST
    09202-70020   (09202-00010)

  1. Remove the retainer, compression spring and valve.

    HINT:
    Arrange the removed parts in the correct order.


3. REMOVE VALVE STEM OIL SEAL
  1. Using needle-nose pliers, remove the 16 oil seals.


4. REMOVE VALVE SPRING SEAT
  1. Remove the 16 valve spring seats from the cylinder head.


5. REMOVE NO. 1 HEAD STRAIGHT SCREW PLUG

NOTICE:
A101373
If coolant leaks from the No. 1 head straight screw plug or the plug is corroded, replace it.

  1. Using a 10 mm hexagon wrench, remove the 3 screw plugs and 3 gaskets.


6. REMOVE NO. 2 HEAD STRAIGHT SCREW PLUG

NOTICE:
A101374
If coolant leaks from the No. 2 head straight screw plug or the plug is corroded, replace it.

  1. Using a 19 mm hexagon wrench, remove the screw plug and gasket.


7. REMOVE STUD BOLT

NOTICE:
If a stud bolt is deformed or its threads are damaged, replace it.

← COMPONENTS (from Aug 2014)DISASSEMBLY (from Aug 2014) →