2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE INTAKE VALVE

  1. A333831E01
    Using SST and wooden blocks, compress the inner compression spring and remove the valve spring retainer locks.
    SST
    09202-00020  
    09202-70020  

  1. Remove the retainer, inner compression spring and valve.

    HINT:
    Arrange the removed parts in the correct order.


2. REMOVE EXHAUST VALVE

  1. A333832E01
    Using SST and wooden blocks, compress the inner compression spring and remove the valve spring retainer locks.
    SST
    09202-00020  
    09202-70020  

  1. Remove the retainer, inner compression spring and valve.

    HINT:
    Arrange the removed parts in the correct order.


3. REMOVE VALVE STEM OIL SEAL
  1. Using needle-nose pliers, remove the 16 oil seals.


4. REMOVE VALVE SPRING SEAT
  1. Remove the 16 valve spring seats from the cylinder head.


5. REMOVE NO. 1 HEAD STRAIGHT SCREW PLUG

NOTICE:
A101373
If coolant leaks from the No. 1 head straight screw plug or the plug is corroded, replace it.

  1. Using a 10 mm hexagon wrench, remove the 3 screw plugs and 3 gaskets.


6. REMOVE NO. 2 HEAD STRAIGHT SCREW PLUG

NOTICE:
A101374
If coolant leaks from the No. 2 head straight screw plug or the plug is corroded, replace it.

  1. Using a 19 mm hexagon wrench, remove the screw plug and gasket.


7. REMOVE STUD BOLT

NOTICE:
If a stud bolt is deformed or its threads are damaged, replace it.

← DISASSEMBLY (Aug 2013 – Jul 2014)INSPECTION (Aug 2013 – Jul 2014) →