REPAIR
Removal / installation · Vehicles built from Aug 2013
| 1.
REPAIR INTAKE VALVE SEAT |
 |
- NOTICE:
- Repair the seat while checking the seating position.
- Keep the lip free of foreign matter.
- Take off the cutter gradually to make the intake valve seat smooth.
- If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.
Text in Illustration
*1
|
Width
|
- If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.
Text in Illustration
*1
|
Width
|
Hand-lap the valve and valve seat with an abrasive compound.
Check the valve seating position.
- Standard width:
- 1.1 to 1.4 mm (0.0433 to 0.0551 in.)
| 2.
REPAIR EXHAUST VALVE SEAT |
 |
- NOTICE:
- Repair the seat while checking the seating position.
- Keep the lip free of foreign matter.
- Take off the cutter gradually to make the exhaust valve seat smooth.
- If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.
Text in Illustration
*1
|
Width
|
- If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.
Text in Illustration
*1
|
Width
|
Hand-lap the valve and valve seat with an abrasive compound.
Check the valve seating position.
- Standard width:
- 1.1 to 1.4 mm (0.0433 to 0.0551 in.)