2013-2015 Land Cruiser Prado · Service Manual Drivetrain

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE MANUAL TRANSMISSION ASSEMBLY
  1. Remove the manual transmission assembly (Click here).


2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

C215530
  1. Remove the release fork and release bearing from the clutch housing.


3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY

C067602E01
  1. Remove the clip and release bearing from the release fork.


4. REMOVE CLUTCH RELEASE FORK BOOT

5. REMOVE RELEASE FORK SUPPORT
  1. Remove the release fork support from the manual transmission unit.


6. REMOVE CLUTCH COVER ASSEMBLY

  1. C215531E01
    Place matchmarks on the clutch cover and flywheel.
    Text in Illustration 
    *a
    Matchmark

  1. Loosen each set bolt one turn at a time until spring tension is released.

  1. Remove the 6 set bolts and pull off the clutch cover.

    NOTICE:
    Do not drop the clutch disc.


7. REMOVE CLUTCH DISC ASSEMBLY

NOTICE:
Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →