REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE FRONT BUMPER LOWER COVER |
Remove the clip, 5 bolts and front bumper lower cover.
| 2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 4 bolts and No. 1 engine under cover.
| 3. REMOVE CRANKSHAFT POSITION SENSOR |
Disconnect the crankshaft position sensor connector and detach the connector from the vacuum transmitting pipe.

Detach the 3 clamps and remove the bolt and crankshaft position sensor.
