2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT CRANKSHAFT POSITION SENSOR

  1. E034870E05
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Cold
    1630 to 2740 Ω
    1 - 2
    Hot
    2065 to 3225 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Crankshaft Position Sensor)

    NOTICE:
    In the chart above, the terms "cold" and "hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

    1. If the result is not as specified, replace the crankshaft position sensor.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →