2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT INTAKE AIR TEMPERATURE SENSOR

  1. A221977E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C
    2.21 to 2.65 kΩ

    Text in Illustration 
    *1
    Resistance kΩ
    *2
    Temperature °C (°F)
    *3
    Acceptable
    *a
    Component without harness connected
    (Intake Air Temperature Sensor)
    If the result is not as specified, replace the intake air temperature sensor.

    NOTICE:
    When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →