2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE INTAKE AIR TEMPERATURE SENSOR

  1. A221976
    Disconnect the intake air temperature sensor connector.

  1. Using a 22 mm deep socket wrench, remove the intake air temperature sensor.

    HINT:
    Replace the intake air temperature sensor if it is deformed, cracked or malfunctioning. It is not necessary to replace the intake air temperature sensor each time the intercooler is replaced.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →