REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1.
REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
|
 |
- Remove the 2 nuts.
Text in Illustration
*1
|
No. 1 Engine Cover Hook
|
*2
|
No. 3 Engine Cover Bracket
|
Detach the 2 No. 1 engine cover hooks from the No. 3 engine cover bracket and remove the No. 1 engine cover.
| 2.
REMOVE INTAKE AIR TEMPERATURE SENSOR |
 |
- Disconnect the intake air temperature sensor connector.
Using a 22 mm ball joint lock nut wrench, remove the intake air temperature sensor and gasket.
- HINT:
- Replace the intake air temperature sensor if it is deformed, cracked or malfunctioning.