INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT INTAKE AIR TEMPERATURE SENSOR |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
20°C
2.21 to 2.65 kΩ
If the result is not as specified, replace the intake air temperature sensor.Text in Illustration *1
Resistance
*2
Temperature
*3
Acceptable Range
- NOTICE:
- When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.
