REPAIR
Removal / installation · Vehicles built from Aug 2013
| 1.
REPAIR INTAKE VALVE SEAT |
 |
- NOTICE:
- Repair the seat while checking the seating position.
- Keep the lip free of foreign matter.
- Take off the cutter gradually to make the intake valve seat smooth.
- If the seating is too high on the valve face, use 25 and 45° cutters to correct the seat.
Text in Illustration
*a
|
1.2 to 1.6 mm (0.0472 to 0.0630 in.)
|
- If the seating is too low on the valve face, use 70 and 45° cutters to correct the seat.
Text in Illustration
*a
|
1.2 to 1.6 mm (0.0472 to 0.0630 in.)
|
- Hand-lap the valve and valve seat with an abrasive compound.
Clean the valve and valve seat.
| 2.
REPAIR EXHAUST VALVE SEAT |
 |
- NOTICE:
- Repair the seat while checking the seating position.
- Keep the lip free of foreign matter.
- Take off the cutter gradually to make the exhaust valve seat smooth.
- If the seating is too high on the valve face, use 25 and 45° cutters to correct the seat.
Text in Illustration
*a
|
1.6 to 2.0 mm (0.0630 to 0.0787 in.)
|
- If the seating is too low on the valve face, use 75 and 45° cutters to correct the seat.
Text in Illustration
*a
|
1.6 to 2.0 mm (0.0630 to 0.0787 in.)
|
- Hand-lap the valve and valve seat with an abrasive compound.
Clean the valve and valve seat.