2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT MAGNET CLUTCH ASSEMBLY

E195722E01
  1. Check the magnet clutch operation.

    1. Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch, and the negative lead is connected to the ground wire.
      If the operation is not as specified, replace the magnet clutch assembly.

  1. Measure the resistance.

  1. Measure the resistance between terminals 1 and 2.

    Standard resistance:
    65 to 125 Ω at 20°C (68°F)

    Text in Illustration 
    *1
    Magnet Clutch Rotor
    *2
    Magnet Clutch Hub
    *3
    Battery
    *a
    Component without harness connected
    (Magnet Clutch Assembly)
    If the resistance is not as specified, replace the cooler compressor assembly.

← DISASSEMBLY (from Aug 2013)REASSEMBLY (from Aug 2013) →