2013-2015 Land Cruiser Prado · Service Manual Drivetrain

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT REAR AXLE SHAFT

R012254E01
  1. Using a dial indicator, measure the rear axle shaft runout and flange runout.

    Maximum runout:
    Shaft runout: 1.50 mm (0.0591 in.)
    Flange runout: 0.05 mm (0.00197 in.)

    If the rear axle shaft or flange is damaged or worn, or the runout is more than the maximum, replace the rear axle shaft.

← DISASSEMBLY (from Aug 2013)REASSEMBLY (from Aug 2013) →