REPLACEMENT
Removal / installation · Vehicles built from Aug 2013
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 2.
REMOVE PARKING BRAKE ASSEMBLY |
 |
Remove the parking brake assembly (Click here).
| 3.
REMOVE REAR AXLE HUB BOLT LH |
 |
- Using SST and a screwdriver or equivalent to hold the axle hub, remove the hub bolt.
- SST
- 09650-17011
Text in Illustration
*1
|
Nut
|
*a
|
Turn
|
*b
|
Hold
|
- NOTICE:
- Do not deform the oil deflector.
- Make sure to align the notch of SST with the flange of the oil deflector.
| 4.
INSTALL REAR AXLE HUB BOLT LH |
 |
Insert a new hub bolt.
Temporarily install a washer and hub nut to the hub bolt as shown in the illustration.
Text in Illustration
*1
|
Washer
|
*2
|
Nut
|
*a
|
Turn
|
*b
|
Hold
|
- NOTICE:
- Install a hub nut to prevent damage to the hub bolt.
Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.
Remove the hub nut and washer.
- NOTICE:
- Do not damage the threads of the hub bolt.
| 5.
INSTALL PARKING BRAKE ASSEMBLY |
 |
Install the parking brake assembly (Click here).
| 6.
INSTALL REAR WHEEL |
 |
-
Torque:
- 112 N*m{
1142 kgf*cm
, 83 ft.*lbf
}