DISASSEMBLY
Removal / installation · Vehicles built from Aug 2013
| 1.
REMOVE OIL PUMP RELIEF VALVE |
 |
- Place the timing belt case on wooden blocks.
Text in Illustration
*1
|
Timing Pointer
|
*2
|
Wooden Block
|
*a
|
Clearance
|
- NOTICE:
- Do not damage the timing pointer.
- Using a 12 mm hexagon wrench, remove the plug, gasket, spring and relief valve.
Text in Illustration
*1
|
12 mm Hexagon Wrench
|
| 2.
REMOVE OIL PUMP COVER |
 |
Remove the 8 screws and oil pump cover.
| 3.
REMOVE OIL PUMP DRIVE GEAR |
 |
Remove the drive gear and driven gear.