2013-2015 Land Cruiser Prado · Service Manual Drivetrain

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
  1. Remove the clutch master cylinder (Click here).


2. REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING

C215423
  1. Remove the compression spring.


3. REMOVE CLUTCH PEDAL SUB-ASSEMBLY

C215422
  1. Remove the nut, washer and bolt.

  1. Remove the clutch pedal from the clutch pedal support.


4. REMOVE CLUTCH PEDAL SPRING HOLDER

C215424
  1. Remove the spring holder from the clutch pedal support.


5. REMOVE CLUTCH SWITCH ASSEMBLY (w/ Cruise Control System)

C215426
  1. Loosen the lock nut and remove the clutch switch.


6. REMOVE CLUTCH PEDAL STOPPER BOLT (w/o Cruise Control System)

C215425
  1. Loosen the lock nut and remove the stopper bolt.


7. REMOVE CLUTCH PEDAL PAD

8. REMOVE CLUTCH PEDAL BUSH

C215427
  1. Remove the 2 bushes from the clutch pedal.


9. REMOVE CLUTCH PEDAL SHAFT COLLAR

C215428
  1. Remove the shaft collar.


10. REMOVE NO. 1 CLUTCH PEDAL CUSHION

C215429
  1. Using needle-nose pliers, remove the 3 cushions from the clutch pedal.


11. REMOVE CLUTCH PEDAL TURNOVER BUSH

C215434
  1. Remove the turnover bush from the clutch pedal.


12. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH

C215435
  1. Using an 8 mm hexagon wrench and hammer, remove the clevis bush.

← COMPONENTS (from Aug 2013)ADJUSTMENT (from Aug 2013) →