INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT REAR DIFFERENTIAL LOCK SLEEVE |
![]() ![]() |
Install the sleeve to the differential case (LH) and check that it moves smoothly.
Install the side gear to the sleeve and check that it moves smoothly.
Using a feeler gauge, measure the clearance between the shift fork and sleeve.

- Maximum clearance:
- 0.15 to 0.35 mm (0.00591 to 0.0138 in.)
| INSPECT DIFFERENTIAL PINION AND SIDE GEAR |
Check that there is no damage to the differential pinion or differential side gear.
If the differential pinion and/or differential side gear is damaged, replace the differential.
| INSPECT DIFFERENTIAL CASE |
Check that the differential case is not damaged.
If the differential case is damaged, replace it.

