2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL CAMSHAFT POSITION SENSOR

  1. G037911E03
    Apply a light coat of engine oil to the O-ring of the camshaft position sensor.
    Text in Illustration 
    *1
    O-Ring

  1. Install the camshaft position sensor with the bolt.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }

    NOTICE:
    Make sure that the O-ring is not cracked or jammed when installing.

  1. Connect the camshaft position sensor connector.

← INSPECTION (from Aug 2013)COMPONENTS (from Aug 2013) →