DIAGNOSIS SYSTEM
Troubleshooting · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| DIAGNOSIS SYSTEM |
Indicator
When there is a problem with the air suspension system, a warning is displayed on the multi-information display and the master warning light comes on.
DTCs (Normal mode)
DTCs are stored in the suspension control ECU and output by using the intelligent tester. Refer to the DTC check procedure (Click here).
| CHECK INDICATOR |
Turn the ignition switch to ON.
After approximately 2 seconds elapse, check that the indicator for the current vehicle height mode is displayed.